Line 6 Pilot's Handbook - Manual (Page 38)

Using Your Feet • Saving and Naming with an FBV
4 • 4
Saving and Naming with an FBV
To prepare for saving, it’s a good idea to browse through the various factory-stored
preset sounds to decide which you can do without. Make a note of their Bank number
and Channel letter so you can save your own sounds there instead.
1. Save: Step on the FX LOOP switch until “NAME EDIT”
is displayed.
2. FBV SHORTBOARD users - Name: The Shortboard’s Amp 1 and Amp 2
switches (labeled Cursor in small text) select one of the characters of the
channel name so you can edit it. The DELAY and REVERB switches (labeled
Character in small text) choose from the available letters, numbers and
symbols. Once you’ve got a name you’re happy with, jump ahead to step 3.
2. FBV Users - Name: The REVERB and TREMOLO switches select which
character of the channel name you would like to edit. The MODULATION
and DELAY switches choose from the available letters, numbers and symbols.
Once you’ve got a name you’re happy with...
3. Pick a Bank: Bank Up and Bank Down switches pick a Bank you’d like to
save to.
4. Complete the Save: Press the A, B, C or D switch to store to that Channel
Memory in the chosen Bank. The display will show
“SAVING”
.
Congratulations, you’re all done!
Duet Manual Page 4 Tuesday, October 1, 2002 9:36 PM