Lexmark Z700 - Manual (Page 39)

Printing transparencies
39
Step 3: Print your iron-on transfers
Click Print.
Note: To prevent smudging, remove each iron-on transfer as it exits the printer, and then
let it dry before stacking. You can also set extra time between pages as they exit
the printer. For help, see the entry on “Wait for pages to dry” on page 11.
Printing transparencies
You can load up to 50 transparencies, depending on the thickness of the transparencies.
Step 1: Load the transparencies
• Use transparencies designed for inkjet printers.
• If the transparencies have paper backing sheets, make sure you separate the paper from the
transparencies before you load them.
• If your transparencies include instructions, read them carefully.
• Load the transparencies vertically against the right side of the paper support.
• Make sure your transparencies are not used or damaged.
• Make sure the rough (print) side of the transparencies is facing you. If the transparencies
have a removable strip, make sure each strip is facing away and down toward the printer.
• Do not force the transparencies into the printer.