Lennox Hearth JABRA PRO 9470 - Manual (Page 37)

37
english
Jabra PrO 9460, 9460-DuO anD 9470 user manual
Headset Signal Tones
The headset uses a variety of soft tones to alert you to events such as an incoming call, multifunction button
presses, volume changes, and more. These enable you to keep track of what is going on while you are wearing
the headset.
State or event Tone description
Sample
(click to play)
button tap a quick medium tone
button double-tap Two button-tap tones
button press The button-tap tone followed by a longer tone
Turn volume up a short, high tone that indicates the new volume
maximum volume reached Two short, high notes
Turn volume down a short, low tone that indicates the new volume
minimum volume reached Two short, low notes
mute
a quick medium tone, rest and quick low tone;
repeats occasionally
Incoming desk phone call a very fast, high-pitch melody
Incoming softphone call a very fast, medium-pitch melody
Incoming mobile phone call a very fast, low-pitch melody
Target changed to desk phone
a slow, high melody; or a human voice announcing
“desk phone” in english
Target changed to softphone
a slow, medium melody; or a human voice
announcing “softphone” in english
Target changed to mobile phone
a slow, deep melody; or a human voice announcing
“mobile phone” in english
Call ended a quick melody ending on a low note
battery low Two very quick, low tones; repeats occasionally
Calls on hold via call waiting
Two slow medium-pitch notes, a long rest, and
then two more; repeats occasionally
Pairing succeeded Three slow tones ending on a medium-high note
error (such as pairing failed) Three quick tones followed by a lower long tone
Headset signal tones and their meanings Table 5: