Land Pride RTR1042 - Manual (Page 23)

21 11/01/11 RTR10 & RTR15 Series Rotary Tillers 311-431M
Land Pride
Section 3: Adjustments
Table of Contents
Drive Chain
Refer to Figure 3-3:
The tension on the drive chain can be easily adjusted by
using the chain tightener stud. Should backlash occur,
loosen the nut and torque the stud counterclockwise to
20 - 30 foot pounds and tighten nut to 400 foot pounds.
Be sure to hold stud in position while tightening nut.
Rear Deflector
Refer to Figure 3-4:
Rear deflector (#1) can be adjusted closer to the ground
to produce a fine soil texture or can be raised to produce
a coarse soil texture. Adjust rear deflector by
repositioning chain (#2) in slot “A”.
Chain Tightener
Figure 3-3
22251
Rear Deflector
Figure 3-4
22250