Land Pride RTR1042 - Manual (Page 6)

4 RTR10 & RTR15 Series Rotary Tillers 311-431M 11/01/11
Important Safety Information
Table of Contents
Safety Labels
1. Your tiller comes equipped with all safety labels in place.
They were designed to help you safely operate your tiller.
Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new
labels go to your Land Pride dealer.
4. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request. To order new labels go to your Land Pride dealer.
818-130C
Operate only w/540 rpm PTO
22246 Model RTR10
22256
Model RTR15
5. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.