Land Pride Treker 4220ST - Manual (Page 47)

Revision Comments Part Description Part No. Ref.
Drawing Image Number dwg21232
FRONT DIFFERENTIAL W/ELE CLTCH 826-398C
#1 Kit includes #2 to #8 & 42 OUTPUT COVER PLATE ASSEMBLY 6203-12-100 1.
Sold with #1 kit MATE-N-LOK- HOUSING 2.
Sold with #1 kit MATE-N-LOK PIN 3.
Sold with #1 kit GROMMET, OUTPUT COVER 4.
Sold with #1 kit COVER PLATE, OUTPUT-MACHINED 5.
Sold with #1 kit & #39 kit O-RING, OUTPUT-164S (SQ. RING) 6.
Sold with #1 kit COIL POCKET INSERT 7.
Sold with #1 kit COIL W/PRESS FIT BOBBIN 8.
ARMATURE PLATE 6203-59-032-B 9.
SHIM .05 THICK BRASS, HALF HARD 6203-26-020-A 10.
6008-C3 DEEP GROOVE ROLLER BEARING
4£ 1215-02-038-T 11.
#12 Kit includes #13 to #16 CLUTCH ASSEMBLY 6203-01-166 12.
Sold separately & with #12 kit 6015-C3 DEEP GROVE ROLLER BALL
BEARING 1215-02-141-T 13.
Sold separately & with #12 kit CLTH.HSG./RNG GR., 42T 6.75DP 6203-13-124-D 14.
Sold separately & with #12 kit ROLL KIT 6203-29-010-0 15.
#16 Kit includes #17 & #18 ROLL CAGE ASSEMBLY 6203-20-072 16.
Sold separately & with #16 kit ROLL CAGE, PLASTIC-MACHINED 17.
Sold separately & with #16 kit SPRING KIT, H-CLIP .008 THK 6203-35-024-0 18.
#19 Kit includes #20 to #21 RACE/OUTPUT HUB ASSEMBLY 6203-27-017-B 19.
Sold with #19 kit RACE/OUTPUT HUB, FEMALE 20.
Sold with #19 kit PAP0806 PERMIGLIDE BUSHING 21.
Sold separately & with #19 kit TC815 NEEDLE ROLLER THRUST BEARING 1242-00-009-T 22.
Sold separately & with #19 kit 1/2 DIA X 1 LG. DOWEL PIN 0430-01-002-T 23.
Sold with #19 kit RACE/OUTPUT HUB, MALE 24.
#25 Kit includes #26 to #32 GEARCASE ASSEMBLY 6203-13-165 25.
Sold with #25 kit MB1615 DU BUSHING 26.
Sold with #25 kit LABEL, BAR CODE 27.
Sold with #25 kit TUBE, VENT 1/2 HOSE 28.
Torque item #29 (PLUG OIL
FILL 3/4-16 HOLLOW HD) 10
ft*lbs. Sold separately & with #25 kit PLUG OIL FILL 3/4-16 HOLLOW HEAD 0518-03-009-T 29.
Sold with #25 kit GEARCASE, LH-MACHINED 30.
Sold with #25 kit BUSHNG, SELF LUBRICATING 80X85X20 31.
#32 Kit includes #33 & #34 DRAIN PLUG ASSEMBLY 6203-95-001-0 32.
Sold with #32 kit WASHER, .625X.06, NYLON 6/6 33.
W/MAG. TIPSold with #32 kit; Torque
item #34 (PLG,OIL DRAIN,3/8-16HH
FLNGE W/M) 9 ft*lbs. PLUG, OIL DRAIN, 3/8-16HH FLANGE 34.
Torque item #35 (5/16" x 1" Hex
Head Bolts) 17 ft*lbs. BOLT KIT 6203-93-001-0 35.
SHAFT PNION 11T3.75DP, MACHINED 6203-47-024-B 36.
ROLLER BALL BEARING 6306-03-C3 DP GROOVE 1215-02-154-T 37.
COVER PLATE, INPUT-MACHINED 6203-12-064-B 38.
#39 Kit includes #6 & #40 to #42 MINOR REPAIR KIT 6203-56-001-0 39.
Sold with #39 kit 0-RING, INPUT, 148S 40.
Sold with #1 kit & #39 kit 25X47X8 TRIPLE LIP OIL SEAL 41.
Sold with #39 kit 40X52X7TC OIL SEAL, OUTPUT 42.
*
*
IMPORTANT NOTES:
1. Torque 3/4" oil drain plug (Item #29) to 10 ft.
lbs.
2. Torque 3/8" oil drain plut (Item #34) to 9 ft.
lbs.
07/25/07 4220ST & 4420ST Utility Vehicles Treker 700-504P 47
Table of Contents Part Number Index
Section 6: Drive Train Land Pride
TREKER 20 SERIES
Front Differential Components
Applies to 4420ST