LevelOne MIDSPAN POH-0850TX - Manual (Page 11)

9
4. GUI Management
Connecting to PoE
Connecting the PoE with PC through the console port. Then, connect the PD (Powered
Device) to the port of PoE. Run the software utility and select the COM port form Serial
Link Setup function. You will see the main utility interface as figure 4-1.
Figure 4-1. The GUI management interface
The GUI management is divided into three parts:
System Setup & Control: main system level parameters setup for the POE
system.
System Information: display hardware version, firmware version, and utility
version.
Device Setting: you can save the device configuration to system, down load the