Leviton AESS5 - Manual (Page 5)

INSTALLATION
WARNING: TO BE INSTALLED AND/OR USED IN ACCORDANCE
WITH APPROPRIATE ELECTRICAL CODES AND REGULATIONS.
NOTE: LEVITON ARCHITECTURAL EDITION™ POWERED BY
JBL SATELLITE SPEAKERS WERE DESIGNED TO BE EASILY
INSTALLED. HOWEVER, IF YOU ARE UNSURE OF YOUR ABILITY TO
PROPERLY INSTALL THESE LOUDSPEAKERS, PLEASE CONTACT
YOUR DEALER OR A QUALIFIED INSTALLER.
NOTE: SPEAKER WIRE RUNS SITUATED INSIDE A WALL NEED
TO BE FIRE-RATED. WHEN IN DOUBT, CONSULT YOUR LOCAL
ELECTRICAL INSPECTOR FOR CORRECT WIRE RATINGS.
WALL MOUNTING
The Cat. No. AESS5 satellite speaker is to be wall-mounted with the
adjustable wall-mounting brackets included, or placed on a shelf.
This product is not intended for ceiling mounting. Note that is the
responsibility of the end user for proper selection and use of mounting
hardware, available through hardware stores, to properly and safely wall-
mount the speakers. Optional, adjustable, wall-mounting brackets are
available from JBL.
Contact your dealer, or call 800-336-4JBL for a dealer near you, and
order model no. WBN26WHT.
Bracket Assembly:
CAUTION: PROPER SELECTION OF MOUNTING HARDWARE NOT
INCLUDED HEREIN AND PROPER ASSEMBLY AND INSTALLATION
OF BRACKETS, INCLUDING BUT NOT LIMITED TO SELECTION
OF APPROPRIATE WEIGHT BEARING SUPPORT AND BRACKET
USE WITH THE SPECIFIED SPEAKER ONLY IS THE EXCLUSIVE
RESPONSIBILITY OF THE CUSTOMER. MANUFACTURER
DISCLAIMS ANY LIABILITY FOR THE SELECTION OF MOUNTING
HARDWARE AND OR BRACKET INSTALLATION.
1. Loosen and remove the molded nut (2) by turning it counter clock-
wise. Use the supplied metal bar (5) if necessary by inserting it in one
of the holes on the molded nut (2).
Vertical Mounting Horizontal Mounting
5