Linksys FESWSK05 v3 - Manual (Page 30)

Fast Ethernet Switched 10/100 Network In a Box
54
Instant EtherFast ® Series
53
Starting Over in Windows 2000
1. Click the Start button, choose Settings, choose Control Panel, then dou-
ble-click the System icon.The System Properties window will open.
2. Choose the Hardware tab.
3. Click the Device Manager button. The Device Manager window will
open.
4. Click the plus sign (+) beside LAN Cards. The EtherFast 10/100 LAN
Card listing should appear.
8. Scroll down to the LAN Cards item and expand it by clicking on the open
[+] sign.
9. Remove all devices with the name Linksys in its description. (If at any
point you are asked to restart the computer, Click No).
10. Scroll down to the Other Devices section. Remove PCI Ethernet
Controller or PCI Ethernet Adapter. (If Other Devices is not listed, pro-
ceed to the next step.)
11. When you’re finished, click on the Close button, shut down Windows, and
restart your computer.
12. After your computer has restarted, turn to the appropriate section for your
operating system (e.g. Windows 95, Windows 98, etc.) and follow the
setup instructions.