Manually installing the monitor driver, Installing the monitor driver in windows xp, Installing the monitor driver in windows 2000 – Lenovo L151 User Manual

Page 20: Manually, Installing, Monitor, Driver

Advertising
background image

.

Clock (pixel frequency) adjusts the number of pixels scanned by one

horizontal sweep. If the frequency is not correct, the screen shows vertical

stripes and the picture does not have the correct width.

.

Phase adjusts the phase of the pixel clock signal. With a wrong phase

adjustment, the picture has horizontal disturbances in light picture.

4. When the image no longer looks distorted, save the Clock and Phase

adjustments.

5. Press

to leave the OSD menu.

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microso�

®

Windows

XP

®

and Microso� Windows 2000 Professional. Please see the Install Driver section

of the Reference and Driver CD for automatic installation.

Installing the monitor driver in Windows XP

To use the Plug and Play feature in Windows XP, files should be loaded from the

Reference and Driver CD.

Note: This section must be completed before continuing with the Windows XP

automatic image setup.

1. Turn off the computer and all a�ached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into

Windows XP.

4. Open the Display Properties window by clicking Start Se�ings Control

Panel, and then double-clicking the Display icon.

5. Click the Se�ings tab.
6. Click the Advanced bu�on.
7. Click the Monitor tab.
8. Click the Properties bu�on.
9. Click the Drivers tab.

10. Open the Hardware Update Wizard window by clicking on Update Driver,

and then click Next.

11. Select Install from a list or Specific location(Advanced), and then click Next.
12. Insert the Setup CD into the CD drive, then click the Have Disk bu�on.
13. Click OK.
14. Ensure that the CD drive le�er is selected.
15. Choose ThinkVision L151 Monitor and click OK. The files will be copied

from the CD to your hard disk drive.

16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh

rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve

display quality. Lenovo recommends using either 1024 x 768 at a refresh rate of 60

Hz, or 640 x 480 at a refresh rate of 60 Hz.

Installing the monitor driver in Windows 2000

To use the Plug and Play feature in Windows 2000, files should be loaded from the

Reference and Driver CD.

3-4

L151 Flat Panel Monitor User’s Guide

Advertising