Energy star, Power consumption, Product power consumption – Lexmark 4800 User Manual
Page 157: Energy star power consumption
O: Indicates that the content of the toxic and hazardous substance in all the homogenous materials of the part is
below the concentration limit requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part
exceeds the concentration limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain
hazardous substances.
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode
Description
Power consumption (Watts)
Printing
The product is generating hard-copy output from electronic
inputs.
16.4
Copying
The product is generating hard-copy output from hard-copy
original documents.
13.6
Scanning
The product is scanning hard-copy documents.
10.3
Ready
The product is waiting for a print job.
9.2
Power Saver
The product is in energy-saving mode.
6.2
High Off
The product is plugged into a wall outlet, but the power switch
is turned off.
not applicable
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is
turned off, and the product is in the lowest possible power
consumption mode.
not applicable
Off
The product is plugged into a wall outlet, but the power switch
is turned off.
0.2
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. Se for current values.
Notices
157