Leupold RX-600 Series - Manual (Page 9)

6
CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
Follow the instructions for “Measuring distance…” as explained previously . 1 .
Once the target has been measured, continue to hold down the POWER 2 .
button and follow the object as it moves .
The distance will automatically update as long as the POWER button is 3 .
continuously depressed .
This procedure can also be used to obtain the range of multiple animals 4 .
or objects; simply move the reticle from one target to another while
holding down the POWER button .
CLEARING THE LAST DISTANCE OBTAINED:
The last range reading does not need to be cleared before reading another
object’s distance . For that reason, there is no reset button . Simply aim at the
new object using the reticle, depress the POWER button and hold until the new
range reading is displayed .