Lenoxx Electronics CD-104 - Manual (Page 19)

IB-CD104(TA)-FD-E-043002
TROUBLE SHOOTING
Problem Remedy
The power is not on.
•
Connect the AC power cord to a wall
outlet securely.
•
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
Make sure the FUNCTION switch is at the
right position as you want.
•
Adjust the volume.
“ ” appears in the display
even when a CD is in place.
•
Insert the CD with the label side up.
CD does not play.
•
Make sure that the CD compartment is
closed.
•
Place the CD with the label side up.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
•
Make sure the FUNCTION switch is at CD
position.
•
Clean the CD, or replace it if the CD is
badly damaged.
•
Place the player in a location free from
vibration.
•
Check if your batteries are fresh.
The sound is weak or has
poor quality.
•
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
The RECORD button does
not function/The tape does
not play.
•
Make sure the safety tab on the cassette
is in place.
•
Make sure the FUNCTION switch is at tape
position.
The tape does not erase
completely.
•
Clean the erasing head (see page 17).
•
Replace all the batteries with new ones
if they are weak.
The tape does not record.
•
Make sure the tape is inserted properly.
•
Make sure the safety tab of the cassette
is in place.
The sound is weak/The
sound quality is poor.
•
Clean the heads, pinch roller and capstan
(see page 17).
General
CD player
Radio
The sound drops out.
Tape player
Cassette PLAY button pops
up.
•
The tape has reached its end. Remove
it, flip to the other side and re-insert.
18
IB-CD104(TA)-FD-E-043002.p65 5/3/02, 4:06 PM 19