Lincoln Electric CV-305 - Manual (Page 2)

A CLOSER LOOK
FEATURES
• Low flat-top case can be placed under a workbench or stacked
on top of each other for smaller footprint.
• 115V or 42VAC wire feeder auxiliary power.
• Twist-Mate ® output connectors require no tools for quick and
easy hook-up. Two Twist-Mate ® Cable Plugs included (K852-95).
SYSTEM SELECTION
Ready-Pak ® Package
Take the hassle out of ordering — order a Ready-Pak ® pre-assembled
welding package. Fully assembled and ready to weld — just add wire
and gas. Select a Ready-Pak
® and use one order number on your
order form.
CV-305
[2]
CV-305 / LF-72 Wire Feeder Ready-Pak ® Package
Our most popular MIG and flux-cored welding system!
Order K2395-1
• CV-305 Power Source (208/230/460/3/60)
• LF-72 Bench Model (Two Roll) Wire Feeder with Universal Wire Reel
stand, 10 ft. Control Cable, and .035-.052" solid wire Drive Roll and
Guide Tube Kits.
• Magnum 400 Welding Gun, 15 ft., .035-.045" wire
• Work (15 ft.) and Wire Feeder (10 ft.) Power Cables Package
• Harris Flowmeter Regulator and Gas Hose.
(Order Swivel Kit K2332-1 for even more flexibility! Note: Can't be used
at the same time with undercarriage while gas cylinder(s) are installed.)
Shown:
CV-305 / LF-72 Wire Feeder Ready-Pak
® Package
www.lincolnelectric.com
1
1. Positive Twist-Mate ® output connector
2. Low inductance negative Twist-Mate ® output connector
3. High inductance negative Twist-Mate ® output connector
4. Voltmeter polarity switch
5. 14-pin MS-type wire feeder connector
6. Circuit breakers
7. "On/Off" power switch
8. Thermal trip indicator light
9. Digital Ammeter/Voltmeter display with switch
10. Output control knob
11. Remote/Local control switch
Key Controls
2 3 4 5
6
7
8
9
11
10