Land Pride Post Hole Diggers HD35 - Manual

65
Post Hole Diggers Hydraulic Drive
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
HD25 and HD35 Models
HD25
(3-Point)
HD25
(Bucket Mount)
HD35
(3- Point)
HD35
(Bucket Mount)
Hydraulic Hoses Standard Optional Standard Optional
Maximum Auger RPM 109 RPM 105 RPM 109 RPM 105 RPM
Gallons Per Minute Rating 5 -12 GPM @ 1500 to 3000 PSI 10 -25 GPM @ 1500 to 3000 PSI
Max torque @ 2500 PSI 700 ft. lbs. 1605 ft. lbs.
Weight with 6” Auger 235 lbs. 185 lbs. 235 lbs. 189 lbs.
Auger Length 48”
Auger Flighting Thickness 1/4”
Auger Pipe 2 1/2” dia.
Auger Teeth Forged, Individually Replaceable
40 Degree Angle Installed on Flat Side
50 Degree Angle Installed on Angled Side
Number of Teeth (6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth)
Pilot Cast steel, 3 drill points
Auger Drive Hydraulic
Gearbox 3.18:1 Ratio
Gearbox oil capacity & Type 4.7 Pints of Gear Lube 80-90W EP
Output Shaft on Gearbox 2” O.D. Round
Hitch Cat I or II Bucket Mount Cat I or II Bucket Mount
Yoke 2 7/8” Tubing Not Applicable 2 7/8” Tubing Not Applicable
Boom Reinforced Tubing Not Applicable Reinforced Tubing Not Applicable
Options and Accessories
Auger Sizes 6”, 9”, 12”, 15”, 18” or 24”
Hydraulic Hoses Not Applicable (2)-24 ft. long hoses Not Applicable (2)-24 ft. long hoses
Hydraulic
Down Pressure Kit Available Not Applicable Available Not Applicable
Storage Stand Available Not Applicable Available Not Applicable
Auger Extensions 7” and 14” Extensions Available
317-076S continued on next page 6/24/11
Hydraulic Drive