Lenmar PPW24K - Manual

Model: PPW24K
Power Anywhere Kit
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner’s manual
Thank you for purchasing the Power Anywhere Kit. Use it anywhere to have unlimited access to power.
Capacity Level / Charge Button
With the built-in “Capacity Level / Charge Button” button, you have the option of checking the remaining
capacity left in the PowerPort Wave2400. Checking remaining capacity is as easy as pushing the button while
the PowerPort Wave2400 is not connected to any device.
One LED indicates 20-40% power remaining.
Two LED’s indicate 40-60% power remaining.
Three LED’s indicate 60-80% power remaining.
Four LED’s indicate 80-100% power remaining.
When you’re ready to charge your device, plug it in and push the “Capacity Level / Charge Button to start the
charging. Once the button has been pushed, it will charge your connected device. If it senses no device is
connected within 30 seconds, it will power off automatically.
Connecting the PowerPort Wave2400
to your Device.
PowerPort Wave2400 (portable battery) , Dual USB Wall Charger, Dual USB Car Charger,
Micro USB Cable, Carrying Case & User Manual
Included in the package you have purchased:
Do not overcharge the PowerPort Wave2400, as it will shorten its life span.
Disconnect the PowerPort Wave2400 as soon as it is practical after the charge is complete. When not in use,
unplug the PowerPort Wave2400 from all cables and devices. Do not drop.
Recycle or dispose of the PowerPort Wave2400 properly. If disposed of in fire or short circuited, the PowerPort
may leak or explode, causing personal injury.
Note:
The PowerPort Wave2400 must be charged prior to first use and may become warm during charging and use.
Features:
Model: PPW24
Cell type: Lithium-Polymer Battery
Input: DC 5V 1.0A max
Output: DC 5V 1.0A
Capacity: 2400mAh
Dimensions: 103.5 x 55 X 11mm
Weight: 41g
Caution:
Specifications
Capacity Level / Charge Button
5
Port
USB
Charging your PowerPort Wave2400
You can charge the PowerPort Wave2400 with the included Micro-USB to
USB cable. Plug the Micro-USB cable into the Micro-USB input port
(labeled “in” on unit), and the other end into your computer’s USB port.
The Dual USB Wall Charger, or Dual USB Car Charger included in your kit.
The LED status indicators show the current charging status of the
PowerPort Wave2400. The LED’s will blink and become steady as it
charges, ascending from the bottom to the top. Once the 4th LED has
become steady, the charging process has completed.
Attach your device using its USB charging/sync cable
(not included) to the PowerPort Wave2400. Once
attached via its USB cable, push the “Capacity Level /
Charge Button” button once, turning it “ON”.
Po wer
Port
™ W a ve2400
PowerPort ™ Wave2400
PowerPort Wave2400 - Portable Battery & Charger
The PowerPort Wave2400 charges your PDA, smartphone,
MP3 player, game system, or almost any device that can be
charged via a USB cable connection.
You have a maximum output of 1.0A with this unit’s USB port.
Dual USB Wall Charger
Operating your Dual USB Wall Charger
Pull out foldable prongs from unit and plug into a
working power outlet. To begin charging, plug in 1 or
2 devices like smartphones, mp3 players, gaming
devices, and more using your device’s existing USB
charge cable.
Specifications
Model: ACUSB2K
Input: AC100-240VAC~50/60Hz
Output: DC 5V, 2A max (1 USB port)
DC 5V, 1A max (2 USB ports using simultaneously)
Dimensions: 70 x 51 x 15mm
Weight: 45g