Land Pride Disc Harrows DH25 - Manual

27
• Cat. 1 & 2 hitch
• 20” or 22” Notched blades
• 3” Square frame tube
• 7-1/2” Blade spacing
• Angle front and rear gangs up to 21 degrees
• Adjustment handle to aid in angling
• 1/2” Thick bearing hangers with two 5/8” U-bolts
• Self aligning, sealed ball bearings
• 1-1/8” Square, high carbon steel gang axle
• 4” x 3” Gang tube
• Optional disc scrapers are adjustable
• Optional 9” center sweep shank
DH25
SERIES
40 - 100 HP — 72” 96”
Heavy-duty 1/2” thick bearing
hangers resist the high torque
from two 5/8” U-bolts.
Disc scrapers are
available to reduce
build-up on discs.
* Wider cutting may be obtained by adjusting
complete gang on gang tube. Adjusting too wide
can leave strip in center of unit. Center sweep can
help alleviate this.