Lexmark S510 - Manual (Page 33)

Load up to Make sure that
10 envelopes • The printable side of the envelope is faceup and the flap
is on the left.
• The paper guides rest against the edges of the envelopes.
• You load the envelope in the center of the paper support.
• You select the correct envelope size. Select the next
biggest size if the exact envelope size is not listed.
• You print the envelopes in landscape orientation.
Warning—Potential Damage: Do not use envelopes that
have metal clasps, string ties, or metal folding bars.
Notes:
– Do not load envelopes with holes, perforations,
cutouts, or deep embossing.
– Do not use envelopes that have exposed flap adhesive.
25 sheets of labels • The printable side of the label is faceup.
• The paper guides rest against the edges of the paper.
Note: Draft mode is available but is not recommended for
use with expensive paper such as heavyweight matte,
labels, photo cards, and glossy paper.
25 greeting cards, index cards, postcards, or photo cards • The printable side of the card is faceup.
• You load the photo paper in the center of the tray.
• The paper guides rest against the edges of the cards.
Notes:
– For best results, allow photos to dry at least 24 hours
before stacking, displaying, or storing.
– Draft mode is available but is not recommended for use
with expensive paper such as heavyweight matte,
labels, photo cards, and glossy paper.
Loading paper and original documents 33