Lennox Hearth IMPRESSA F50 - Manual (Page 16)

16
If the machine is disconnected from power supply, the time
must be programmed again.
15.6 Programming the automatic switch-on time
You must programme the time (Chapter 15.5) if you want to
use the automatic switch-on function.
Ⅲ
READY
Ⅲ Press programming key (4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until MACHINE ON is displayed.
Ⅲ
MACHINE ON
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-on time.
Ⅲ --:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
Ⅲ
12:--
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
Ⅲ
12:05
Ⅲ To confirm the new switch-on time, press the Rotary Switch (1).
Ⅲ
MACHINE ON
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ READY
15.7 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
Ⅲ
READY
Ⅲ Press programming key
(4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
Ⅲ
OFF AFT. HR
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-off time. Switch-off time OFF AFT. HR
Ⅲ
5.0 HR
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
Ⅲ
1.0 HR
Ⅲ To confirm the new switch-off time, press the Rotary Switch (1).
Ⅲ
OFF AFT. HR
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
READY
15.8 Cup counter
You can check how many cups of the following coffee products
were drawn off:
a) 1 cup
b) 2 cups
c) Powder coffee