Locks and security – Lincoln 2010 MKT User Manual

Page 151

Advertising
background image

“Administrator key” or Admin key. The Admin key can be used to create
a MyKey™, program optional MyKey™ settings, and disable the
MyKey™ feature. When the MyKey™ feature is enabled the user can use
System Check in the message center to see how many MyKeys™ and
Admin keys are programmed to the vehicle, and how many total miles
have been driven with the MyKey™ active.

MyKey™ Restricted Features

Standard settings – These settings cannot be changed
• The audio system will be muted whenever Belt-Minder௡ is activated

until the safety belts are buckled. Refer to the Seating and Safety
Restraints
chapter for a detailed description of Belt-Minder

operation.

• Low fuel warnings are displayed in the message center followed by a

chime when the Distance to Empty value reaches 75 miles (120 km).

• The Reverse sensing system, Blind Spot Information System (BLIS௡)

with Cross Traffic Alert and Collision Warning system cannot be
turned off.

Optional settings – These settings can be changed
• Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are

displayed followed by a chime when the vehicle speed has reached
80 mph (130 km/h).

• Visual warnings are displayed followed by a chime when a preselected

vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded

• The maximum volume of the audio system is limited to 45%. MYKEY

VOLUME LIMITED will be displayed in the radio or (if equipped)
navigation screen when attempting to exceed the limited volume

• The AdvanceTrac௡ system cannot be turned off. When this optional

setting is on, the MyKey™ user will not be able to deactivate the
system. Note: It may be beneficial to deactivate the AdvanceTrac

system if the vehicle is stuck in snow, mud, or sand.

Create a MyKey™

To program MyKey™ on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey™ into the ignition. (For
vehicles equipped with push button start, put the Intelligent Access Key
in the backup slot; see the Driving chapter for the location of the
backup slot.) Turn the ignition on. Use the message center buttons to do
the following:

1. Press SETUP until PRESS RESET TO CREATE MYKEY is displayed.

Locks and Security

151

2010 MKT (mkt)
Owners Guide, 3rd Printing
USA
(fus)

Advertising