Linksys WPG54G - Manual (Page 17)

11 Chapter 4: Connecting the Presentation Player
Hardware Installation
Wireless-G Presentation Player
3. To have a wired connection, connect one end of the Category 5 Ethernet network cable to your PC’s Ethernet
adapter. Connect the other end to the Ethernet port on the back of the Presentation Player.
4. For a wireless connection, fix the direction of the antenna. Place the antenna perpendicular to the ground.
5. Place the Player near the monitor or projector facing the presenters so that the infra red in the remote control
will be in line of sight to the Player.
Figure 4-3: LAN Connection