Logic Controls LC8000 - Manual (Page 3)

3
LC8000 User Manual Rev. 1
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions carefully. Save these instructions for future reference.
1. Follow all warnings and instructions marked on the product.
2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use this product near water.
4. This product should be operated from the type of power indicated on the power adaptor.
If you are not sure of the type of power available, consult your dealer or local power
company.
5. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
6. If an extension cord is used with this product, make sure that the total ampere rating of
the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the wall
outlet does not exceed the fuse rating.
7. Allow at least 6 inches of space from the top of the unit and 3 inches from the sides to
allow proper ventilation.
8. We recommend all servicing done on this product be done by qualified service
personnel. Aside from upgrades or swapping out the compact flash or hard-drive please
refer all other servicing to the Logic Controls RMA Dept.
9. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power cord or plug is damaged or frayed
b) If liquid has been spilled into the product
c) If the product has been exposed to rain or water
d) If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating instructions
since improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal
condition.
e) If the product has been dropped or the cabinet has been damaged
f) If the product exhibits a distinct change in performance, indicating a need for
service.