Legacy Car Audio LR-203FX - Manual (Page 2)

LOCATION AND FUNCTION OF CONTROLS
1. VOLUME BUTTON
Press the "+" button to increase volume level; press the "-" button to decrease
volume level.
SELECT BUTTON
Press it can select VOL/BAS/TRE/BAL/FAD, and with the +/- button to adjust
them, and the word which function it is selected will be indicated on LCD.
2. POWER BUTTON
Press it to select you desired radio band and the word which band is selected
will be indicated on LCD.
(NOTE: When it is off, you can press any button to turn on the unit.)
3. MANUAL TUNING UP/DOWN BUTTON
Press them to tune up or down, and the current frequency appears on LCD.
4. EJECT BUTTON
Push it to eject the tape.
Push the fast forward and rewind buttons together to switch from one
side of the tape to the other.
5. CASSETTE DOOR COMPARTMENT
6.FAST FORWARD/REWIND PROGRAM BUTTONS
7. LCD (LIQUID CRYSTAL DISPLAY)
SPECIFICATION
LW SECTION(OPTION)
Power Supply The Main Unit.........................DC 13.8 Volts. Negative Ground
Maximum Output Power................................................................40W X 4
Unit Dimension.....................................................181(W) x 181(D) x 53(H)
Frequency Range.......................................................87.5MHz - 107.9MHz
Frequency Range...........................................................530KHz - 1710KHz
Frequency Range............................................................144KHz - 290KHz
FM SECTION
MW SECTION
GENERAL
200K 50K
10K 9K
USA EUROPE
IMPORTANT: This radio is set to USA frequency by factory, if European
frequency is required please flip the frequency step switch on
the side of the unit.