LevelOne FSW-2409TFX - Manual (Page 25)

25
RJ-45 P
IN
S
PECIFICATION
When connecting your Level One 16/24/32Port 10/100Mbps
Fast Ethernet Switch to another switch, a bridge or a hub, a
modified crossover cable is necessary. Please review these
products for matching cable pin assignment.
The following diagram and tables show the standard RJ-45
receptacle/connector and their pin assignments for the
switch-to-network adapter card connection, and the straight
/ crossover cable for the Switch-to-switch / hub / bridge
connection.
RJ-45 Connector pin assignment
Contact Media Direct Interface Signal
1 TX + (transmit)
2 TX - (transmit)
3 Rx + (receive)
4 Not used
5 Not used
6 Rx - (receive)
7 Not used
8 Not used
The standard cable, RJ-45 pin assignment