Lenovo THINKCENTRE 6396 - Manual (Page 61)

Diagnostic Error Code FRU/Action
000-038-XXX
BIOS Extension failure
1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 152
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error
1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 152
2. System board
000-195-XXX
BIOS Test aborted by user
Information only
Re-start the test, if necessary
000-196-XXX
BIOS test halt, error threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX
BIOS test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
000-198-XXX
BIOS test aborted
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2. Flash the system and retest. See
“Updating (flashing) BIOS from a
CD-ROM or diskette” on page 152
3. Go to “Undetermined problems” on page
78
000-199-XXX
BIOS test failed, cause unknown
1. Go to “Undetermined problems” on page
78
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX
BIOS APM failure
1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 152
2. System board
000-270-XXX
BIOS ACPI failure
1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 152
2. System board
001-000-XXX
System Test Passed
No action
001-00X-XXX
System Error
System board
001-01X-XXX
System Error
System board
Chapter 7. Symptom-to-FRU Index 55