Video source setup, Progressive scan setup, Setup menus – Linn UNIDISK SC PLAYER User Manual

Page 18

Advertising
background image

Video Source Setup

Default setting: Off

The following menus allow you to configure the UNIDISK SC’s video output for any of the
auxiliary source inputs: DIG 1 - 4 Video, AUX 1 - 2 Video and MAIN Video (for use in a
KNEKT system).

Set to Off if the auxiliary source is audio only or
if the auxiliary source carries a video signal
that you do not want to pass through the
UNIDISK SC.

Set to Internal if you want the UNIDISK SC to
output its internal video signal (the Linn name
screen) when this auxiliary source is selected.

Set to Pass-through if you want to route the
auxiliary source’s video signal through the
UNIDISK SC (for Pass-through to work, input
and output connectors must match).

Example:
If you have a set-top box’s S-video output connected to the UNIDISK SC’s S-VIDEO IN,
and the set-top box’s digital optical output connected to the UNIDISK SC’s DIG 3 input,
you would want to set DIG 3 Video to Pass-through.

Progressive Scan Setup

The two items below refer to the UNIDISK SC’s component outputs (i.e. the TV SCART
output on the SCART version, the YPrPb outputs on the Phono version), whether they
are outputting an interlaced or progressive signal.

Dither

Default setting: Off

On display devices with limited colour depth (e.g. LCD
panels) bands of colour shade may be seen, rather than
smooth transitions in colour shade.
Setting to On, reduces such colour banding.

Video Detection

Default setting: Auto

The setting for this option is dependent on the method
that was used to record the original video source
material.
If the source material was recorded on film (e.g. most
movies), set to Progressive.
If the source material was recorded on video tape (e.g.
most television programmes), set to Interlaced.
If you want the UNIDISK SC to determine the setting
based on the information contained on the disc being
played, set to Auto.

Note:
You may sometimes find that when set to Auto the screen image flickers. In this case
choose whichever of the other two settings provides the better picture.

Setup Menus

UNIDISK SC PLAYER

Owner’s Manual

English

12

Advertising