LST HT-11002 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED HT-11002_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
• Addressable conventional technology
• Alarm temperature 61°C
• Individual detector addressing by
means of optional address module
• Optional connection of remote
indicator
• Extremely fl at design
• Sealed electronics
Description
The Thermal Max Detector HT-11002 recognises a ma-
ximum temperature of 61°C as sign of fi re. It complies
with Class A2S and can be used up to a room height
of 6m.
Addressable conventional technology is used for alarm
transmission to the fi re detection control panel. By
means of the optional Address Module NG60-1, each
detector can be addressed individually, thus allowing to
display the detector address, as well as an assigned
element text, on a suitable fi re detection control panel.
A detector fault is indicated by a yellow fl ashing of the
multicoloured status LED.
The detector can be attached to various bases and it
can be protected against theft.
Specifi cations
Operating voltage Supply through the detector line voltage
Current consumption typ. 65µA (quiescent)
Alarm temperature typ. 61°C
Operating temperature max. +50°C
Ambient temperature - 40°C to +70°C (no condensation or icing)
Relative humidity 0 – 98% (no condensation)
Dimensions ш Ч H 100 × 36 (mm)
Colour white
Weight 70g
Approval VdS G204034
Order number 242031
Order name Thermal Max Detector/Conv./ORBIS/Apo HT-11002