What you need to get started – La Crosse Technology Weather Direct WD-3303 User Manual

Page 6

Advertising
background image

Version 1.0 - 11/6/2008

Page 6 of 25

What You Need to Get Started:

• High-speed Internet connection – cable, DSL or other broadband

Internet service will work.

• Router or broadband modem with built-in router. (contact your Internet

service provider ISP for information on compatibility with their service)

• If you have any questions about routers, or you would like a

recommendation on a great router for use with Weather Direct®, see -

www.weatherdirect.com/router

• Valid e-mail address – required to make sure you can retrieve your

password and receive other information about your user profile.

• 2

“AA”

Alkaline batteries for the Wireless Outdoor Sensor



NOTE: Rechargeable batteries are not recommended due to the wide variation in
performance between brands and types. Please use only fresh Alkaline batteries.

• 2

“C”

Alkaline batteries for the Wireless Display



NOTE: Rechargeable batteries are not recommended due to the wide variation in
performance between brands and types. Please use only fresh Alkaline batteries.

• Visit

www.weatherdirect.com

and click “Register” to Start

• After you have registered and selected a forecast location and Time

Zone for your Wireless Display, the forecast data will show up on the
display within 60 seconds.

• A reasonably current Windows, Macintosh, or Linux PC with internet

browser installed is required for initial set up and configuration
changes.

• The browser must be configured with Java Script enabled. Most

browsers allow JavaScript as a standard feature. If you have turned
off support for JavaScript in your browser, please allow JavaScript to
run again to register or configure your Device.

Advertising