Lennox International Inc. Ellite Series - Manual (Page 16)

Page 16
Override Temperature Setting −− Vacation Hold
SYSTEM
You may use the vacation hold function to override the pro-
grammed temperature setting for a designated number of days.
1 − Press the UP or DOWN arrow next to the temperature
display to adjust the temperature as desired.
NOTE − Hold Temperature Until" appears on the screen. The
currently programmed start time of the next scheduled period
also appears, as does an additional set of arrows. This is the
time of day that the override will expire after the hold period ends.
2 − Press the HOLD key twice. Screen shows Hold Tempera-
ture Until" one day.
3 − Press the UP and DOWN arrows to adjust the number of
days you would like to override the schedule.
NOTE − The arrows used to adjust the number of days are dis-
played for approximately seven seconds. Press the screen
where the number of days are shown to allow the arrows to re-
appear.
4 − Press the CANCEL key to cancel the vacation override
early.
NOTE − When the programmed vacation hold expires, the
screen displays Following Schedule" to indicate that the hold
has ended.
SCHED CLOCK SCREEN
CANCEL
THU
FAN
AUTO
HEAT
Inside
DAYS
Hold Temperature
Until
Set To