LA Audio Electronic PC80 MKII - Manual (Page 5)

5
3. INSTALLATION
INSPECTION & UNPACKING
The PC80 is carefully packed at the factory in a carton designed to withstand transit handling,
however, if transit damage is evident, DO NOT discard any of the packaging and notify the carrier
immediately, it is they who are responsible for any claims.
OPERATING ENVIRONMENT
The units are designed to operate between 0 and 50 deg C (32-122 F) and in an atmosphere of
relative humidity up to 80%.
POWER REQUIREMENTS
Each unit is powered by a 9V PP3 battery which is fitted by removing the rear cover of the box (4
screws) and plugging the battery into the connector provided.
EXTERNAL CONNECTIONS
Generator: Output male XLR type
Receiver:
Input female XLR type