Land Pride 701-137M - Manual (Page 2)

2 Manual No. 701-137M 06/20/07
Land Pride
Assembly Instructions
■
Assembly Instructions
A detailed listing of parts for this accessory kit is provided
on page 3. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
ALL DIRECTIONS REFERRING TO THE RIGHT AND
LEFT ARE WHEN THE OPERATOR IS IN THE
MACHINE.
1. Loosely fasten two 5/16" x 1" Carriage Bolts (#2) and
two 5/16" Serrated Flange Hex Nuts (#4) in the two
outside bumper mount holes on the front of the
machine. See illustration A.
2. Slide the Brush Guard (#1) attaching brackets over
top of the heads of the two 5/16" x 1" Carriage Bolts
(#2) installed in step one. See illustration B.
3. Attach the bottom of the Brush Guard (#1) to the
bottom of the machine with two 5/16" x 1" Carriage
Bolts (#2) and two 5/16" Nylock Nuts (#3) provide
with this kit. See illustration C.
4. Make all necessary adjustments at this time. Fully
tighten all attaching hardware at this time.
Fully tighten all attaching hardware at this time.
Illustration A Illustration B
Illustration C Illustration D