Linear MULTI-CODE 3089 - Manual

OPERATIONAL CHECK
To check operation, move back a reasonable distance (about 50 ft.) and press the
transmitter button. Operation should be reliable at this distance but
environment and location of both the transmitter and receiver will affect the
range. If the transmitter is stowed well out of sight, it may be necessary to
remove it from its mounting and hold near the windshield. Try different locations
and positions. If operation is still unsatisfactory, the problem may be isolated by:
1. Checking the door operator. If the door will not open when the wall button is
pressed, the problem is likely to be the operator. If the door will open by pressing
the wall button, but not when the radio control button is pressed, the problem is
probably in the radios.
2. Replacing the transmitter battery. If after performing the above operational
checks, the controls still do not function, they should be returned to your dealer for
repair or replacement.
CAUTION:
Any changes or modifications in intentional or unintentional
radiators which are not expressly approved by LINEAR CORPORATION could
void the user’s authority to operate this equipment. This applies to intentional
and unintentional radiators certified per part 15 of the F.C.C. rules and
regulations.
LINEAR CORPORATION
2055 Corte del Nogal • Carlsbad, CA 92009
(760) 438-7000
Copyright © 1999 Linear Corporation 215641 A
INSTALLATION INSTRUCTIONS
DIGITAL TRANSMITTER MODEL 3089
Congratulations! You have just purchased a MULTI-CODE Digital Transmitter,
which we believe to be the finest product of its kind on the market. With a little
care this transmitter should provide you with many years of excellent service.
Please take a moment to read the following instructions and you will find that setting
your new transmitter will be quite an easy matter.
ACCESSING THE CODE SWITCH
On the model 3089 the entire front lower half of the transmitter is removable.
Grasp the front lower half of the case near the bottom on both sides and pull
upward away from the transmitter, this will disengage the lower end. Then pull
downward to remove the lower cover, this will expose both the code switch and
battery compartment.
INSTR,INSTL,MC3089,1CH,TX
LINEAR P/N: 215641 A
INK: BLACK
MATERIAL: 20 LB. MEAD BOND
SIZE: 9.000" x 3.500"
SCALE: 1-1
SIDE 1 OF 2
®