Lucent Technologies Optical Amplifier - Manual (Page 2)

To learn more about our
comprehensive portfolio of Optical
Networking products, please
contact your Lucent Technologies
Sales Representative or visit our
web site at http://www.lucent.com.
This document is for planning purposes
only, and is not intended to modify or
supplement any Lucent Technologies
specifications or warranties relating to
these products or services. The
publication of information in this
document does not imply freedom from
patent or other protective rights of
Lucent Technologies or others.
Metropolis is a registered trademark of
Lucent Technologies Inc.
UL is a registered trademark of
Underwriter’s Laboratories Inc.
NEBS is a trademark of
Telcordia Technologies Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
ONG v1.0703
Technical Specifications
Description Specifications
1.Optical Parameters
Wavelength Range 1530 nm to 1563 nm
Input Power Range –27 to +4 dBm
Output Signal Power +17 dBm
Signal Gain Variable 13 – 22 dB
Signal Spontaneous Noise Figure < 7.0 dB
Polarization Mode Dispersion 0.5 ps @ –20 dBm input
Isolation Isolator at input and output ports
2.Electrical Parameters
Communications Interface IEEE 802.3 10/100 MHz port front panel
EIA RS-232 port front panel
Power Consumption (at 50°C EOL) Maximum 25 Watts; 6 Watts typical
Supply Voltage –48 VDC A and B feeds
Minimum -40 VDC
Maximum -60 VDC
Current Maximum 0.52 A at –48 VDC
3.Environmental Parameters
Storage Temperature -40° to 70° C
Ambient Operating Temperature 0° to 50° C
Humidity Operation 5 to 95%RH, non-condensing
4.Physical Attributes
Dimensions (H x W x D) 1.9 x 17.19 x 11.1 inches
Unit Weight <10.0 lbs
Optical Connectors SC-UPC
5.Management
SNMP Version 1 and Version 2c
FTP RFC 959
TL1 Telcordia GR-833CORE and related
requirements including NSIF-033-1999
6.Laser Safety
Class IM Product Viewing the laser output with optical
instruments can pose an eye hazard.
7.Product Certifications
UL ® Certified
CE
NEBS™ level 3