LST NTM2402-1 - Manual (Page 2)

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED NTM2402-1_DBL_LST_EN_0851.PDF • PAGE 2
A
Building Safety. Building Security.
Power supply housings
The wall-mount cabinet NTG24-1 provides space
for the power supply module as well as for the in-
stallation of 2 stand-by batteries with 12V/max.
45Ah, one Relay Module RL58-1 or RL58-2 and
one Multi Module MEA244-1/E. In this case, the
power supply module serves as power supply for
the multi module and the loads that are actuated
via the 4 outputs.Furthermore, via the inputs of
the multi module, fault messages can be forwar-
ded to the fi re detection control panel.
If required, further modules can be mounted in
the cabinet door.
Thanks to the sophisticated design of the Po-
wer Supply Front Panel NTG24-1CE, it can be
mounted either on a 19“ pivoting frame or on the
mounting plate of a switch cabinet.
In both cases, the optional stand-by batteries
are accommodated in the interior of the switch
cabinet.
Power Supply Housing NTG24-1
Protection class IP30
Dimensions W × H × D 442 Ч 460 Ч 203 (mm)
Colour grey white, RAL 9002
Weight without installations approx. 7kg
Order number 317030
Order name Power Supply Housing NTG24-1
Power Supply Front Panel NTG24-1CE
Dimensions W × H × D 478 × 266 (6 HU) × 20 (mm) (without power supply module)
Colour grey white, RAL 9002
Weight without installations 1.4kg
Order number 317031
Order name Power Supply Front Panel NTG24-1CE
Specifi cations
In addition to the power supply module, the Power Sup-
ply Front Panel NTG24-1CE can also accommodate a
Relay Module RL58-1 or RL58-2.
Both housings are made of powder coated sheet steel.
At the front of the housing, the built-in display and ope-
rating board allows the signalling of the most important
operating conditions as well as the resetting of the in-
ternal buzzer.
The display and operating elements can be labelled in
the respective national language by means of the sup-
plied insertable labelling strips.