Lenovo THINKSERVER TD230 - Manual (Page 25)

The Redirection Console handles mouse emulation from local window to remote screen in either of two
methods:
• Absolute Mode: Select it to have the absolute position of the local mouse sent to the server. Use this
mode for Windows operating systems.
• Relative Mode: Select it to have the calculated relative mouse position displacement sent to the server.
Use this mode for Linux operating systems.
Click Save to use the selected mode.
Macro-variables of the keyboard
You can view and change the macro-variables of the keyboard in this page. The macro-variables defined
herein will correspond to the buttons in the right top corner of remote control window. The buttons may be
selected at your option. Help may be used to view the name of supported key.
Remote Control
The Remote Control page helps you perform the following remote operations on the server:
• Console redirection
• Server power control
Console Redirection
By default, the Remote Control tab opens in the Console Redirection page. Launch the remote console
KVM redirection window from this page.
Click Launch Console to launch the redirection console and manage the server remotely.
Note: Java Run-Time Environment (JRE, version 6 update 10 or later) must be installed on the client prior
to launch of JNLP file.
Server power control
The server power control page shows the power status of the server.
The following power control operations can be performed:
Option Task
Reset Server Select the option to hard reset the host without powering
off.
Power OFF Server Select the option to. immediately power off the host.
Power ON Server Select the option to power on the host.
Power Cycle Server Select the option to immediately power off the host, then
power it back on after one second.
Perform Action button Click it to execute the selected remote power command.
Note: All power control actions are done through the BMC and are immediate actions. It is suggested to gracefully
shut down the operating system via the KVM interface or other interface before initiating power actions.
Chapter 6 . Remote Management Module Web Console options 19