Lancom Systems 821 - Manual (Page 28)

LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN
̈ Chapter 2: Installation
28
EN
LANCOM 1711 VPN
ᕡ
Voltage switch
ᕢ
Connection for the included power adapter
ᕣ
Switch with four 10/100Base-Tx connections
ᕤ
WAN port
ᕥ ISDN/S
0
port
ᕦ Serial configuration port
ᕧ Reset switch
The reset switch has two different functions depending on the length of time
that it is pressed:
୴ Restarting the device (soft reset) – push the button for less than five
seconds. The device will restart.
୴
Resetting the configuration (hard reset) – push the button for more
than five seconds. All the device's LEDs will light up green and stay
on. As soon as the reset switch is released, the device will restart with
factory default settings.
2.4 Hardware installation
The installation of the LANCOM base station takes place in the following
steps:
ቢ LAN – connect the LANCOM to your LAN or to an individual PC. For that
purpose, plug the included network cable (green plugs) into the LAN con-
nector of the device
¿
(LANCOM 821 ADSL/ISDN and LANCOM 1621
ADSL/ISDN) or
»
(LANCOM 1711 VPN) and the other end into a free net-
work connecting socket of your local network, into a free socket of a hub/
switch or into the network socket of an individual PC.
Reset AC12V LAN3 LAN4 LAN2 LAN1 ISDN S
0
WAN
10/100Mbit/s
Config(COM)
ᕡ » ᕢ ´ ¿ ² ᕧ