Lancom Systems 821 - Manual (Page 57)

LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN
̈ Chapter 6: Providing dial- up access
57
EN
6.1.3 Settings for IPX
Two IPX network numbers must be provided for remote access to an IPX net-
work:
̈
the IPX network number of the head office
̈
an additional IPX network number for the higher-level WAN
The required network numbers are designated as “External Network Num-
bers”. Like IP network addresses, they apply to an entire LAN segment. On the
other hand, internal IPX numbers are used to address specific Novell servers
in the LAN. All three specified network numbers must be distinct from one
another and from all used internal IPX network numbers.
In addition, it may be necessary to enter the frame type (“binding”).
Specifying the IPX network number and binding used is not necessary if the
remote network also contains a Novell server. A network number for the WAN
must also be entered manually in this case, however.
6.1.4 Settings for NetBIOS routing
All that is required to use NetBIOS is the name of a Windows workgroup from
the router's own LAN.
The connection is not established automatically. The RAS user must
manually establish a connection to the LANCOM via Dial-Up Net-
working first. When connected, they can search for and access com-
LAN of the head office
IPX network no.: 00000001, Binding: Ethernet_II
(0123) 123456
WAN
IPX network no.:
00000009
IPX internal net:
00020002
Remote
workstation
ISDN adapter
User: 'SAMPLE'
(0123) 777888
VPN or ISDN
connection