Button locations and functions – Linear RV4500 User Manual
Page 3
Button Locations and Functions
3
1. Power On/Off: Press to turn the unit on or off.
2. Disc Door: To play a disc, insert the disc with label facing forward.
3. Disc Door Release: Press to open the door so the disc can be inserted.
4. Auxiliary Button (AUX): Press to choose between Av In F (Audio/Video in Front), Av In r (Audio/Video
in Rear)
5. Display Area: This area displays all function information for the radio, clock, disc player and auxiliary
input devices.
6. Mute Button: Press to mute the audio, press again to restore the audio.
7. Speaker Selection Buttons: Press to switch the speakers sets A and B on and off.
8. Disc Button: Press to select the movie or music player mode.
9. Radio Button (AM/FM): Press to select the radio mode. Sequential presses will select radio band:
FM 1, FM 2, FM 3, AM 1 and AM 2.
10. Play/Pause Button (
�
ll): Press to pause disc play, press again to resume play.
11. Seek Down (l
��
), Seek Up (
��
l) Buttons:
Radio Mode: Press to tune the radio to a lower or higher radio station.
Disc Mode: Press to search for the beginning or next track or chapter.
12. Volume and Select Button: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
13. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
14. Audio/Video Input Jack: Press the AUX button until “Av In F” appears in the display then plug in a
device via the 3.5mm audio/video input socket.
Note: The RV4500 does not control the device, it just allows the audio/video to be played through the
system.
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
3-Beam Laser Pickup
A
B
AUX
AM/FM
DISC
SPEAKER
SPK
FM
ST
RESET
AV HEADPHONES
®
1
2
5
7
4
8
9
10
11
12
13
14
15
16
17
19
21
23
25
27
3
18
20
22
24
26
28
6