LG E2711PY - Manual (Page 18)

16
Control Panel Functions
INPUT Button When two input signals are connected, you can select
the input signal (D-SUB/DVI/DP) you want. When only
one signal is connected, it is automatically detected. The
default setting is D-Sub.
(SOURCE Hot key)
Exit the OSD(On Screen Display). EXIT Button
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2711PY : 1920 x 1080
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
Power Button &
Power Indicator