Legacy Car Audio LDVD52 - Manual (Page 10)

Push [SETUP], the screen will display system setting menu, the
moment you can push [UP], [DOWN] to move the high lighting
band to the desired item, push [ENTER] to display sub-menu. In
the sub-menu push [RIGHT] to enter inferior sub-menu. You can
push [UP], [DOWN] to move the high lighting band in all menu
pictures. Push [ENTER] your selection will be valid. Push [LEFT]
to escape the sub-menu in the right of the screen. Any time push
[SETUP] or [EXIT SETUP] you will escape system setting state.
The high lighting band
indicates current item
The explanation to the
current item
6. System setting
System setting
Following are some examples of frequent setting the user can
setting other items following their instructions.
1.Push [SETUP] to enable the screen display the system
setting picture, make sure
the high lighting band has been
located in GENERAL SETUP push [ENTER], TV screen will
display following picture.
Example 1:Set TV screen ratio mode
Frequent operation
14 15
Attention:
While playing, you can
push [PREVIOUS] or [NEXT]
to play the previous track or
the next one.
While playing you can
push [STOP] to back to the
menu picture.
There are two kinds of file disc play mode:1. No-menu play mode.2.
Menu play mode. The factory default play mode of this unit is no-menu
play mode. Please refer to the description on [SETUP] setting menu for
the information on the switching of play modes.
In the first play mode, after a disc is put into the player and the player
reads the disc, the player will go into [STOP] state and display [STOP]
on DVD display panel.
At this time, you can press a numerical key to select a file and play the
disc starting with the selected file or press [PLAY] key to play the disc
starting with the first file of this disc. This file may be either an MP3 file
or [MPEG] file. When an MP3 is being played, you can press [DISPLAY]
key to view file play time.
Note:1.If you are not quite familiar with thisunitand press [PROG] key
Or select programming function through the menu when the discs
described above are played,error operations will be caused.
2. If your disc contains files of multiple formats, press [STOP] key after
the play of the disc is finished and display the picture that you can`t
usage [UP]or[DOWN ]key controled the menu.But you may press
Previous or Next key to view track numbers in the list on the right side or
directly press a numerical key to select a track to play.
After a JPEG file disc is read out, you can press PLAY key to start
playing.