LG LG B2150 EN - Manual (Page 25)

B2150 User Guide 25
General functions
If Call waiting is activated, you can put the first call on
hold and answer the second, by pressing
or by
selecting left soft key, then Hold & Answer. You can
end the current call and answer the waiting call by
selecting left soft key and then End & Answer.
Rejecting an incoming call
You can reject an incoming call without answering by
simply pressing the
key.
During a call, you can reject an incoming call by
pressing the left soft key [Menu] and selecting the
Multiparty/Reject or by pressing the
key.
Muting the microphone
You can mute the microphone during a call by pressing
the left soft key [Options], then selecting Mute. When
the handset is muted, the caller cannot hear you, but
you can still hear them. The handset can be unmuted
by pressing the [Unmute].
Switching DTMF tones on during a call
To turn DTMF tones on during a call, press the left soft
key, and then select DTMF on. DTMF tones can be
turned off the same way. DTMF tones allow your
phone to make use of an automated switchboard.
Multiparty or conference calls
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network operator
supports this feature. A multiparty call can only be set
up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty
call is set up, calls can be added, disconnected or
separated (that is, removed from the multiparty call but
still connected to you) by the person who set up the
multiparty call. These options are all available from the
In-Call menu. The maximum callers in a multiparty call
are five. Once started, you are in control of the
multiparty call, and only you can add callers to the
multiparty call.
Making a second call
You can make a second call while currently on a call.
Enter the phone number and press the
key. When
the second call is connected, the first call is
automatically placed on hold. You can swap between
two calls by pressing the left soft key then selecting
Swap.