Lindy 51245 - Manual

PCIe Low Profile
2S (16C950 128 FIFO)
User Manual English
LINDY No. 51245
www.lindy.com
Introduction
Thank you for purchasing the LINDY PCIe Low Profile two Port Serial.
This card is equipped with one high speed RS-232 serial interfaces.
The serial ports include 128Byte FIFO with speeds up to 921Kb/Sec.
Port Specification
Serial Port:
•
Chipset: Oxford 952, 128Byte DMA FIFO
•
Compatible chips: with 16C950, 16C750, 16C650, 16C550,
and 16C450.
•
IEEE standard: RS-232 Interface
•
Max. Speed: Bi-directional speeds from 50 bps to
15Mbps/port.
•
2 x DB9 Male
Package Contents
1 x LINDY PCIe Low Profile 2S Card
LINDY User manual
LINDY Driver CD
Installation
1.
Turn off the power of your computer and remove the power
cable
2. Install the PCIe Low Profile card into an available PCIe Low
profile slot in your computer
3. Connect the peripheral ie Printer, Modem, etc. to the adapters
port
4. Re-connect the power cable & turn on the power of your
computer
PCI device listing display (for example…)
Bus
No
Device
No
Func
No
Vendor ID Device
ID
Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7168 Simple COMM.
Controller
10
If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an
error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the
software from the driver CD.
Pin Assignments
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector :
Pin Signal Pin Signal Pin Signal Pin Signal
1 CD 4 DTR 6 DSR 8 CTS
2 RD 5 GROUND 7 RTS 9 RI
3 TD
Technical Specifications
•
Support x1,x2,x4,x8,x16
（
lane
）
PCI-Express Bus
connector keys
•
Operating system: DOS, WIN 9.x, ME, NT, 2000, XP, 2003
Server, VISTA, Win7, LINUX,
•
5V / 12V / RI (no power) power selectable on each
individual port (Pin 9
th )
•
Ready of the Intel and AMD 32/64-bit CPU System
•
Built-in 128 byte hardware FIFO
•
IRQ and IO address assigned by System
•
Certified by Microsoft WHQL, CE, FCC approval
•
PCB: 80 x 65 mm