Loewe Centros 1202 - Manual (Page 17)

17 -
Navigating in Menus
In this operating manual the RC3 remote control
arrow keys are represented as follows:
OK
The arrows correspond to
“ “ in the text.
The OK function is represented as
“OK“ in the text.
Press .
The menu is displayed.
Select the desired option with  / .
The desired entry is selected. Press  to call up
the corresponding second level.
Select the second option with  / .
Press  /  to call up the corresponding third
level.
Use  to select the desired settings and confi rm
your selection with OK.
Some options required additional steps.
Press to quit the menu.
Activating Digital Link
With Digital Link, Loewe TV sets pass on the
remote control signals to Centros via the Euro-
AV connection. Digital Link is useful if you want
to install Centros in a concealed place, e.g. in a
closed rack.
Switching on Digital Link.
Centros must be switched on. Press the
key on Centros for > 3 secs. “LINK“ appears
briefl y in the Centros display.
Switching off Digital Link.
Centros must be switched on. Press the
key on Centros for > 3 secs. “FRONT“ appears
briefl y in the Centros display.
1.
2.
3.
4.
5.
6.
7.
•
•
The General Menu
Automatic Programming
This DVD recorder is fi tted with a tuner capable of
receiving up to 88 channels.
Note: The channel is set automatically when using
Digital Link Plus.
Preparation:
Connect the DVD recorder to the aerial system. See
“Connecting to the Aerial“ on page 13.
Press .
The menu is displayed.
Select the “General“ option with  / .
Press  to call up the second level.
Select the „Auto Programming“ option with 
/ .
Press  to call up the third level. The country
option is highlighted.
Select a country with  /  and press .
The “Start Search“ symbol is highlighted.
Press OK to start the program search.
The tuner cycles automatically through all avail-
able channels and transfers all programs found
to the tuner‘s memory.
Searching 11%
Stop
Germany Auto Programming
Program Edit
Clock Set
Display Mode
AV1 to Decoder
PBC
Factory Set
TV Aspect
1.
2.
3.
4.
5.
6.
7.
Digital Link Plus
If you have connected the DVD recorder to a Loewe
TV set with Digital Link Plus or a comparable
system from another manufacturer (e.g. EasyLink,
Mega Logic, Project 50), the program list will be
transferred from the television set to the DVD re-
corder. This takes place when you register the DVD
recorder with the TV set, or when you make any
changes to the programs on the TV set (re-sorting,
deleting, adding). After a change of this sort, the
TV set will ask you to start transferring the changed
program list.
The DVD recorder detects a connected TV set with
Digital Link Plus or a similar system from another
manufacturer and adjusts the DVD recorder accord-
ingly. This means that you cannot search for, delete
or sort TV programs on the DVD recorder. The
menu items are grayed out; during the automatic
search it is only possible to transfer the program
information from the TV set.
Note that all programs that you receive via aerial or
cable must be stored in program numbers 1 to 88
on the TV set.
If the TV set does not ask you to transfer the
program information, then start the transfer on the
DVD recorder.
If your TV set is equipped with Digital Link Plus or
with a comparable system from another manufac-
turer, only carry out program changes on the TV
set.
If the TV set that you have connected to the DVD
recorder does not have Digital Link Plus or a
comparable system, then you should harmonize
the DVD recorder and TV set program lists. This will
help you to fi nd programs on the TV set and DVD
recorder.
Initial Installation
32122 DVD Rec_Centros_GB.indb 17 32122 DVD Rec_Centros_GB.indb 17 26.04.2005 11:23:15 26.04.2005 11:23:15