LG RD-JT91 - Manual (Page 23)

Function
23
MENU prev. move F G select
Keystone 0
Auto Source
Blank Image
Lamp Mode
Lamp Time 0 Hr
F G
1. Press the MENU button and then use F , G button to select the menu.
2. Press the OK ( A ) button and then use D , E button to select Lamp Mode item.
3. Press the F , G button to select Normal mode or Silent mode .
● To exit the menu display, repeatedly, press the MENU button.
Off
F G Blue
F G Normal mode
Lamp Mode Function
MENU prev. move F G adjust
Keystone 0
Auto Source
Blank Image
Lamp Mode
Lamp Time 0 Hr
F G
1. Press the MENU button and then use F , G button to select the menu.
●The used lamp time is displayed.
●When projector lamp is reaching the end of its life (over 2000 hours), the lamp indicator will
be turned red.
●The lamp warning LED illuminates red continuously in the case of excessive lamp time.
Off
F G Blue
F G Normal mode
Checking lamp time
1. Press the STILL button.
* You can freeze the input image.
2. To exit Pause, press any button .
* The STILL function would release automatically after about 10 minutes.
Using Still function
<Moving Image> <Still Image>