LumiSource B51 User Manual
Page 10
CLEANING/CARE INSTRUCTIONS
Fabric: Use a clean cloth to dab lightly with soap and water. DO NOT rub.
DO NOT immerse in water. DO NOT use detergent.
TROUBLESHOOTING BOOMCHAIR™
If a problem occurs while using this product, please contact us. DO NOT open unit or attempt to repair on your own. It may result in
serious injury from electric shock and void your product warranty.
MAINTENANCE AND REPAIR
Q: Why isn’t there sound coming from any of my speakers?
A: Ensure your BoomChair™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is
turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up.
Q: Why isn’t there sound coming from one of the speakers?
A: Ensure the audio cord to the BoomChair™ is securely connected as described in the Setup Guide.
Make sure that both the left and right channel audio inputs and outputs are securely connected to the BoomChair™ and audio device.
Q: Where can I get more information?
A: Visit us at www.BoomChair.com or www.LumiSource.com
Contact information: LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007
E-mail: [email protected]
NOTE: PLEASE DO NOT USE ON HARDWOOD FLOORS, IT MAY CAUSE SCRATCHING.
10