LevelOne FSW-1611TX - Manual (Page 15)

15
10Mbps, with Auto-Negotiation 20Mbps Bandwidth
(10BASE-T, Full-Duplex)
F Helpful Warning: If the attached device is set to a fixed mode (ex:
Forced Full-Duplex) it will not operate as an Auto-Negotiation device.
MAC Address Table
Every Ethernet data packet includes both source and destination
addresses. This 6-byte ID is called the MAC (Media Access Control)
Address.
The Switch can automatically learn and store MAC addresses.
However, the MAC address table is volatile: it disappears when the
Switch is powered “Off” or reset.
Note: When the network needs reconfiguration, we recommend
to restart switch first. After all nodes have been moved, Remove
the power cord and re-attach it on the back panel to rebuild the
internal MAC address table.
Sample Application
The optimal application for this Switch is to interconnect file servers
with other bandwidth-hungry workgroups, departments, and offices all
with dedicated bandwidths.