Low fluid level, Correct fluid level, High fluid level – Lincoln 2008 Town Car User Manual

Page 251: Adjusting automatic transmission fluid levels, Maintenance and specifications

Advertising
background image

Low fluid level

Do not drive the vehicle if the fluid
level is at the bottom of the dipstick
and the ambient temperature is
above 50°F (10°C).

Correct fluid level

The transmission fluid should be checked at normal operating
temperature 150°F-170°F (66°C-77°C) on a level surface. The normal
operating temperature can be reached after approximately 20 miles (30
km) of driving.

You can check the fluid without driving if the ambient temperature is
above 50°F (10°C). However, if fluid is added at this time, an overfill
condition could result when the vehicle reaches normal operating
temperature.

The transmission fluid should be in
this range if at normal operating
temperature (150°F-170°F
[66°C-77°C]).

The transmission fluid should be in
this range if at ambient temperature
(50°F-95°F [10°C-35°C]).

High fluid level

Fluid levels above the safe range
may result in transmission failure.
An overfill condition of transmission
fluid may cause shift and/or
engagement concerns and/or
possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick. Refer to Maintenance
product specifications and capacities
in this chapter.

2008 Town Car (tow)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

251

Advertising