LG A3UH363FA0 - Manual (Page 46)

46 Multi type Air Conditioner
Operation
• Room temperature sensor. (THERMISTOR)
• Maintains the room temperature in accordance with the Setting Temp.
• Indoor fan is delayed for 5 sec at the starting.
• Restarting is inhibited for approx. 3 minutes.
• High, Med, Low, CHAOS, JET COOL
• Intermittent operation of fan at low speed.
• The fan is switched to low(Cooling), med(Heating) speed.
• The unit will be stopped after 1, 2, 3, 4, 5, 6, 7 hours.
• The fan is switched to intermittent or irregular operation
• The fan speed is automatically switched from high to low speed.
• The louver can be set at the desired position or swing
up and down automatically.
Art Cool Type Indoor Unit
Operation ON/OFF by Remote controller
Sensing the Room Temperature
Room temperature control
Starting Current Control
Time Delay Safety Control
Indoor Fan Speed Control
Operation indication Lamps (LED)
Soft Dry Operation Mode
• The function will be operated while in any
operation mode with selecting the function.
• The function is to be stopped while it is
operating with selecting the function.
• Both the indoor and outdoor fan stops dur-
ing defrosting.
• The indoor fan stops until the
evaporator pipe temperature will be reached
at 28
°
C(82.4
°
F).
Sleep Mode Auto Control
Natural Air Control by CHAOS Logic
Airflow Direction Control
Defrost(Deice) control (Heating)
Hot-start Control (Heating)
PLASMA
: Lights up during the system operation.
Sleep Mode : Lights up during Sleep Mode Auto operation.
Timer : Lights up during Timer operation.
Defrost Mode : Lights up during Defrost Mode or
Hot Start operation.(Heat pump model only)
PLASMA : Indicate PLASMA purifier operation.
On/Off
Desire temperature For cooling,dehumidification,heating modes it display Destired temperature
indicator
• Cooling : 18
°
C~30
°
C(64
°
F~86
°
F) • AI : Auto Operation
• Dehumidification : 18
°
C~30
°
C(64
°
F~86
°
F) • Po : Jet Cool
• Heating : 16~30
°
C(60
°
F~86
°
F) • Lo : Test Mode
Outdoor unit
operation : Lights up during outdoor unit operation.(Cooling model only)