Legend Audio L4269 - Manual (Page 19)

Operation
1
Also can enter channel number directly,eg:2-0.
.
Note
If skip is ON on one channel, press CH+/- button, the
channel will not appear.
2.
Using CH+/- buttons.
Press CH+ button to select a channel number in
number increasing direction.
Press CH- button to select a channel number in
number decreasing direction.
Select the desired sound
Press VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level
is displayed automatically on the TV screen.
Mute
1 Press MUTE button on the remote control and
will display on the screen. At this time, the sound
of the TV set is turned off.
2 If you want to recover the sound, press MUTE
button again or directly press VOL+ button.
.
.
icon
Volume
Select the desired program
Owner s Manual 19