Land Pride FDR2572 - Manual (Page 28)

26
Section 7: Features & Benefits
FDR2572 & FDR2584 and Rear Discharge Grooming Mowers 310-262M
Table of Contents
5/29/13
Section 7: Features & Benefits
FDR25 Series Rear Discharge Mowers
Features Benefits
2 Cutting widths 72" and 84"
Gearbox HP rating 15 - 50 HP
Rear discharge The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a
possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow
around objects.
Deflectors Built-in to throw material and debris down.
Clevis type lower
hitch points Allows for easy hook-up by being able to remove pins and back into clevises.
Floating 3-Point Top and bottom hitch points float up and down which allows the mower to float over uneven
terrain.
5/16" Rolled front on deck 5/16" roll formed front deck edging designed to take heavy abuse.
Frame-over-deck design Frames takes stress out of deck by supporting it.
3/16" Deck thickness Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.
Lower hitch points
adjust in and out Accommodates many tractor configurations by adjusting in and out.
FDR2572 Only - Solid rubber
tires with roller bearings Solid rubber tires on the FDR2572 are sandwiched between the rim halves, bolted in, and
can’t go flat. Roller bearings allow for a long life.
FDR2584 Only - Semi solid
tires with roller bearings Semi solid tires on the FDR2584 offer premium flotation. Roller bearings allow for a long
life. Semi solid tires offer shock absorption.
Heavy-duty Gauge wheel arms 1/4" Gauge wheel arms increases strength.
Non-aligned gauge wheels Rear wheels don’t track behind the front wheels to reduce laying grass over.
High blade tip speed 72" = 18,130 fpm For cleaner cutting and better dispersion of clippings.
84" = 17,210 fpm
Choices of blades Low, medium, high-lift, or mulching blades are available to match customer needs and
specific applications.
Blade overlap Blade overlap of 1 1/4" assures no skipping in tight turns.
1 3/8" Machined blade spindle
with ball bearings
and cast iron housing. Machined spindle for balanced performance and accuracy, ball bearings for smooth and
quiet running, cast iron housing for added protection and durability.
Top greasing spindles Assures top bearing gets grease. No shields to remove.
Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.
Vacuum formed
ABS belt guards No scratching, no rattling.
Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belt
tension.
Blade bar Bar gives additional support to blade. (Not available on FDR2572)
Top Hitch Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.
5 Year Limited Gear Box
warranty Shows our confidence in the gearbox integrity. 5 year Parts & Labor with S/N 329841+.
Driveline hanger For ease in hookup and storage of driveline. Keeps driveline off ground.
Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal increases
productivity.